#pragma once

// ---------- Wi-Fi ----------
#define WIFI_SSID        "skynet"
#define WIFI_PASSWORD    "0218kirill"
#define WIFI_CONNECT_TIMEOUT_MS 15000

// If the station connection fails, the ESP32 starts its own access point
#define AP_SSID          "VolumeControl"
#define AP_PASSWORD      "12345678"   // min 8 chars

#define MDNS_HOSTNAME    "volume"     // http://volume.local

// ---------- Time (NTP, works only in station mode) ----------
#define NTP_SERVER1      "pool.ntp.org"
#define NTP_SERVER2      "time.google.com"
#define TIME_ZONE        "MSK-3"      // POSIX TZ string, e.g. "CET-1CEST,M3.5.0,M10.5.0/3"

// ---------- Pins (chosen to not clash with the TFT pins in platformio.ini) ----------
#define PIN_ENC_CLK      32
#define PIN_ENC_DT       33
#define PIN_ENC_SW       25
#define PIN_SERVO        13
#define PIN_RELAY        26

// ---------- Encoder ----------
#define ENCODER_REVERSE      0    // set to 1 if rotation direction is inverted
#define ENCODER_STEPS_PER_DETENT 4
#define VOLUME_STEP          2    // % per encoder detent
#define BUTTON_DEBOUNCE_MS   30

// ---------- Servo ----------
// Pulse widths for volume 0% and 100%. Tune to the real travel of the pot.
#define SERVO_MIN_US         500
#define SERVO_MAX_US         2400
#define SERVO_SPEED_US_PER_STEP 20   // smoothing: max pulse change per update
#define SERVO_UPDATE_MS      10
#define SERVO_DETACH_IDLE_MS 1000    // release servo when idle to avoid hum/jitter

// ---------- Relay ----------
#define RELAY_ACTIVE_LEVEL   HIGH    // many relay modules are active LOW

// ---------- Display ----------
#define DISPLAY_UPDATE_MS    20      // also the touch polling period

// ---------- Touch ----------
#define TOUCH_VOLUME_STEP    1       // % per tap on -/+
#define TOUCH_REPEAT_DELAY_MS 400    // hold -/+ this long to start auto-repeat
#define TOUCH_REPEAT_MS      80
#define TOUCH_RECAL_PRESSURE 400     // touch at power-up stronger than this -> recalibrate

// ---------- Persistence ----------
#define SAVE_DELAY_MS        2000    // write to NVS after values stop changing